Krone Comprima F 125, Оригинальная инструкция по эксплуатации, Страница: 197 / 430

Settings
197
Pos: 50.26 /Ü berschriften/Ü berschriften 2/F-J/G/Gar nbr emse einstell en @ 127\mod_1346138729566_78.docx @ 1147164 @ 2 @ 1
12.11 Setting the Twine Brake
Pos: 50.27 /Ü berschriften/Z wischenüberschriften/A-E/Bei Ausführung Garn- und N etzbi ndung @ 335\mod_1429618464750_78.docx @ 2552971 @ @ 1
With twine tying and net tying version
Pos: 50.28 /BA/Bedienung /R undballenpr esse/Garnbi ndung C omprima/Gar nbr emse ei nstellen_Bil d_C ompri ma @ 343\mod_1433165708305_78.docx @ 2595482 @ @ 1
3
2
1
Fig. 167
Pos: 50.29 /BA/Bedienung /R undballenpr esse/Garnbi ndung C omprima/Gar nbr emse ei nstellen_Text_C omprima @ 343\mod_1433165675551_78.docx @ 2595451 @ @ 1
The twine brake (1) is located in the twine box. The setting screws (2) hold the tying twine under
tension. The tying twine must always be held under tension to ensure that it can be cut off
properly. At the same time, however, the tying twine must not be tightened too much, so that it
can pass easily through the rubber roller when starting.
Different types of tying twine may have different friction properties. If the type of tying twine is
changed, readjust the twine brake:
• Turn the setting screws (2) clockwise or anticlockwise.
Direction of rotation of
setting screws (2) Pretension of compression
springs (3) Brake force of twine
brake (1)
Clockwise rotation Higher Higher
Anticlockwise rotation Lower Lower
It is possible that the compression springs (3) will need to be adjusted differently so that the cut
of twine ends have the same length.
Pos: 50.30 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1