manualshive.com logo in svg

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 84 / 120

Поделиться
Скачать
Krone BiG X 1000 Скачать руководство пользователя страница 84

IV - 18

Info Centre

4.6.2.3 Adjusting the lifting gear control

•

= Lifting gear pressure control; the control

sets the pressure on the ground to a constant
value.

•

= Lifting gear position control; the control

sets the height constant relative to the machine.

•

= Lifting gear distance control (optional,

only in conjunction with distance sensors); the
control sets the height constant relative to the
ground.

• You can use the rotary potentiometer to select the

setting for the lifting gear control. The selection box
is highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the selection box.

• You can use the rotary potentiometer to adjust the

desired lifting gear control.

• Pressing the rotary potentiometer causes the

setting to be applied and returns you from the
selection box.

• Activating the 

D

 key brings up the basic screen.

• To open the settings for AutoScan, press the 

C

key.

• Pressing the 

 key on the rotary potentiometer

takes you one menu level back.

1

2

3

4

5

6

7

8

A

B

C

D

BX500021_1

1

2

3

4

5

6

7

8

A

B

C

D

BX500022_1

4.6.2.4 Setting the number of blades

After the number of blades has been changed (see
chapter Maintenance - Working with Half the Number of
Blades), the current number of blades must be set.
Setting the number of blades automatically adjusts the
speed of the feed drive roller to the set cutting length of
the new number of blades.

• You can use the rotary potentiometer to select the

setting for the number of blades. The input field is
highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the input field.

• You can use the rotary potentiometer to adjust the

desired number of blades.

• Pressing the rotary potentiometer causes the

setting to be applied and returns you from the
selection field.

• Activating the 

D

 key brings up the basic screen.

• To open the settings for AutoScan, press the 

C

key.

• Pressing the 

 key on the rotary potentiometer

takes you one menu level back.

https://tractormanualz.com

Содержание BiG X 1000

























































































































Отзывы:

Нет отзывов