Krone BiG X 1000 Скачать руководство пользователя страница 81

Страница: 81 / 120

IV - 15

Info Centre

4..6.1.2 Setting the grass pick-up working width

Working width = swathed width

• You can use the rotary potentiometer to select the

setting for the working width. The input field is
highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the input field.

• You can use the rotary potentiometer to adjust the

desired working width.

• To exit the input field again, press the rotary

potentiometer.

• Activating the

key brings up the basic screen.

• To open the settings for load limit control, press the

key.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

4.6.1.3 To adjust the lifting gear control

•

= Lifting gear pressure control; the control

sets the pressure on the ground to a constant
value.

•

= Lifting gear position control; the control

sets the height constant relative to the machine.

•

= Lifting gear distance control (optional,

only in conjunction with distance sensors); the
control sets the height constant relative to the
ground.

• You can use the rotary potentiometer to select the

setting for the lifting gear control. The selection box
is highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the selection box.

• You can use the rotary potentiometer to adjust the

desired lifting gear control.

• Pressing the rotary potentiometer causes the

setting to be applied and returns you from the
selection box.

• Activating the

key brings up the basic screen.

• To open the settings for load limit control, press the

key.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

BX500016

BX500017

https://tractormanualz.com

Содержание BiG X 1000

























































































































Результаты поиска

Содержание BiG X 1000

Отзывы:

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 81 / 120

Результаты поиска

Содержание BiG X 1000

Отзывы: