Krone BiG X 1000 Скачать руководство пользователя страница 107

Страница: 107 / 120

Info Centre

IV - 41

4.7.11

Menu 1-9 „Contractor address“

The main menu "Settings" is active.

• Select menu 1-9 "Contractor" with the rotary

potentiometer.

• Press the rotary potentiometer to call the

<Contractor Information> mask.

A maximum of 6x30 characters can be
entered. The information is used each
time a print job is sent to the CAN
printer. If a line contains no characters
(including no spaces), that line will
not be considered for printing.

• Pressing the rotary potentiometer opens an

alphanumeric input field (1).

• Turn the rotary potentiometer to select a letter

(yellow mark).

• Press the rotary potentiometer to select the letter.
• Selecting the "Enter" symbol (2) and confirming

causes the program to accept and save the entry or
change.

Selecting the "ESC" symbol (3) and
confirming causes the program to exit
the input field without saving the
entries or changes.

• Pressing the key

on the rotary potentiometer

takes you one menu level back.

BX500659

BX500660

BX500661

https://tractormanualz.com

Содержание BiG X 1000

























































































































Результаты поиска

Содержание BiG X 1000

Отзывы:

Krone BiG X 1000, Оригинальная инструкция по эксплуатации, Страница: 107 / 120

Результаты поиска

Содержание BiG X 1000

Отзывы: