manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone BiG Pack 870 HDP XC Скачать руководство пользователя страница 272

21

Maintenance - Compressor

21.1

Cleaning/changing the filter element at compressor

272

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

21

Maintenance - Compressor

BP000-267

For version “without compressed air brake"

The compressor is located between the drawbar beams.

The compressed air for cleaning the knotter is supplied via a compressor (2) mounted between
the drawbar beams.

The compressor is driven via a V-belt pulley (4) mounted on the flywheel and the V-belt (1). The
tension on the V-belt can be changed by moving the compressor in the oblong holes (5).

For “compressed air brake” version:

If balers are fitted with a compressed air brake, the compressed air connection on the tractor is
used to fill the compressed air reservoir for cleaning the knotter.

21.1

Cleaning/changing the filter element at compressor

BP000-266

INFORMATION

Clean the air filter (1) at least once a day or several times a day in case of high dust load. For
heavy accumulations of dirt in the air filter, the intake manifold (2) can be attached directly to
the cabin roof of the tractor using a retrofit kit (order No 00 287 363 *).

„

Shut down and safeguard the machine, 

refer to page 25

.

„

Observe the intervals for cleaning/changing the filter element, 

refer to page 236

.

„

Clean the area around the air filter (1) and make sure that no foreign bodies get into the air
filter.

„

Move the retaining bracket (3) on the air filter (1) up/down.

Содержание BiG Pack 870 HDP XC



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды