Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 229 / 410

Settings 15
Checking/setting Variable Filling System (VFS) 15.20
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 229
15.20.8 Setting stop of the sensing rake
BPG000-049
ü The machine is shut down and safeguarded, refer to page 25 .
„
Loosen the nuts (19) and move the stop (10) to the rear.
„ Pull the sensing rake (11) to the rear to initiate the Variable Filling System.
„
Release flywheel brake, refer to page 89 .
„ Turn the flywheel manually in working direction until the grooved ball bearing (7) is on the
highest position (area (I)) of the cam disc (5).
Æ
In this position, the tines (18) of the sensing rake (11) must be outside (II) of the packer tray
(12).
„
Check if the tines (18) are outside (I) of the packer tray (12).
Æ
If the tines are not outside the packer tray:
„ Correct the length of the threaded rod until the tines are outside the packer tray.
Setting the stop
„ Move the stop (10) until the dimension is X=2 mm .
„
Tighten the nuts (19).