manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone BiG Pack 870 HDP XC Скачать руководство пользователя страница 186

14

Driving and Transport

14.2

Checking the lighting system

186

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

ü

For “self-steering axle” version:

 The wheels of the self-steering axle are positioned

straight.

ü

 

For “self-steering axle” version and “Medium 1.0” version:

 When exceeding a speed

of 30 km/h the stop cock for the self-steering axle is locked,

refer to page 187

.

ü

 

For “self-steering axle” version and “Comfort 1.0” version:

 The self-steering axle is

locked, 

refer to page 135

.

ü

The parking brake is released, 

refer to page 109

.

ü

The regulating valves on the tractor are in neutral position and locked.

ü

The brake works faultlessly.

ü

The lighting has been controlled and works faultlessly.

ü

The tyres have no cuts or breaks.

ü

The tyre pressure of the tyres is correct, 

refer to page 57

.

„

Call road travel screen, 

refer to page 133

.

14.2

Checking the lighting system

2

1

BPG000-032

„

Check the function of the rear reflector (1) and rear lamps (2).

„

Clean dirty rear reflectors (1), rear lamps (2), yellow reflectors (mounted on both sides of the
machine) and the front white side marker lamps.

14.3

Self-steering axle

INFORMATION

Observe the user instructions provided by the tractor manufacturer for parallel operation of the
tractor control units! The locking cylinder of the self-steering axle must be connected before or
at the same time as the other hydraulic supply elements of the machine!

Содержание BiG Pack 870 HDP XC



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды