Foreign ISOBUS terminal
11
Varying functions to KRONE ISOBUS terminal
11.2
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
123
INFORMATION
No ISOBUS Shortcut Button available
If no ISOBUS Shortcut Button is available on ISOBUS terminals of other manufacturers, the
icon (1) is shown in the display. It is not possible to switch off machine functions via ISOBUS
Shortcut Button.
11.2
Varying functions to KRONE ISOBUS terminal
The job computer provides information and control functions of the machine on the display of
the external ISOBUS terminal. Operation with an external ISO terminal is similar to the KRONE
ISOBUS terminal. Prior to start-up, refer to the mode of operation of the KRONE ISOBUS
terminal in the operating instructions.
One major difference from the KRONE ISOBUS terminal is the arrangement and number of
keys with functions which are specified by the selected external ISOBUS terminal.
Only the functions which differ from the KRONE ISOBUS terminal are described below.
11.2.1
Scroll wheel
The
scroll wheel
is used to set the following values on the KRONE ISOBUS terminal
•
Target bale channel flap pressure/target bale channel flap force
•
Bale length
•
Number of MultiBales
In the case of ISOBUS terminals these values are set via a specified
selection key
(see
operating instructions of the terminal manufacturer).
11.2.2
Background colour/acoustic signals
Background colour
The "Background colour" menu is not called on external ISOBUS terminals. If such a setting
option is available, it is carried out directly on the external ISOBUS terminal (see operating
instructions of the terminal manufacturer).
Audio signals
If necessary, acoustic signals must be released on the external ISOBUS terminal (see operating
instructions of the terminal manufacturer).
