Krone Big Pack 1290 HDP Скачать руководство пользователя страница 221

Страница: 221 / 422

Settings

Setting the plunger 16.18

BiG Pack 1290 HDP XC

Original Operating Instructions 150000752_01_en

221

16.18.2

Checking/setting the cleaning rails

BP000-216

The cleaning rails (1) are positioned on the 4 rolls (3) of the plunger. They remove dirt deposits
from the running rails of the plunger.

The machine is shut down and safeguarded,

refer to page 26

Check dimension X.

If the dimension is

X=1–2 mm

, the setting is correct.

If the dimension is

not X=1–2 mm

, the cleaning rails (1) must be adjusted.

Setting

Loosen the screws (3).

Adjust the cleaning rails (1) to dimension

X=1–2 mm

Tighten the screws (3).

Repeat this procedure for all cleaning rails.

16.18.3

Lateral setting of plunger

BP000-217

The plunger (1) must be centered in the bale channel (2).

Содержание Big Pack 1290 HDP







































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1290 HDP

Отзывы:

Krone Big Pack 1290 HDP, Оригинальная инструкция по эксплуатации, Страница: 221 / 422

Результаты поиска

Содержание Big Pack 1290 HDP

Отзывы: