manualshive.com logo in svg

Krone Big Pack 1290 HDP, Оригинальная инструкция по эксплуатации, Страница: 175 / 422

Поделиться
Скачать
Krone Big Pack 1290 HDP Скачать руководство пользователя страница 175

Terminal – Menus

14

Menu 14 "ISOBUS" 14.14

BiG Pack 1290 HDP XC

Original Operating Instructions 150000752_01_en

175

14.14.2

Menu 14-2 “Driving speed/direction of travel diagnostics”

EQG000-012

ü

Menu 14 “ISOBUS” is called, 

refer to page 173

.

„

To open the menu, press 

.

Æ

The display shows the “Driving speed/direction of travel diagnostics” menu .

Display area

Icon

Designation

Explanation

<--- 0

Driving forward

0 --->

Reversing

+25.5 km/h

Speed for forward travel

km/h or mph depending on selected
system of units.

-25.5 km/h

Speed for reverse travel

PTO speed

Value is provided via ISOBUS from
the tractor.

The direction of travel of the tractor
is evaluated for locking the steering
axle.

If the evaluation of the ISOBUS data
from the tractor has been activated.

The direction of travel of the tractor
is not evaluated for locking the steer-
ing axle.

If the evaluation of the ISOBUS data
from the tractor has not been activ-
ated.

14.14.3

Menu 14-3 "Configuring main window"

This menu can be used to set the information which is to be displayed in the lower information
line of the main window. Up to 5 display elements can be displayed simultaneously in the main
window. Each display element can be selected only once.

Depending on the machine configuration, up to 9 display elements can be selected which 5
display elements are to be displayed in the main window.

Содержание Big Pack 1290 HDP







































































































































































































































































































































































































































Отзывы:

Нет отзывов