Krone Big Pack 1270 Скачать руководство пользователя страница 80

Страница: 80 / 440

Start-up

8.3

Connecting the hydraulic hoses

BiG Pack 1270

Original Operating Instructions 150000747_02_en

BP000-096

8.3

Connecting the hydraulic hoses

BP000-097

Depressurise the tractor hydraulics.

Shut down and safeguard the machine,

refer to page 27

Clean and dry the connections of the quick couplings.

For “Comfort 1.0” version

Tractor with Load Sensing system

The system screw of the hydraulic system is fully screwed in,

refer to page 73

Connect the hydraulic hose (

) to the Load Sensing connection of the tractor.

Connect the hydraulic hose (

) to the connection for the depressurised return.

Connect the hydraulic hose (

) to the connection for the Load Sensing control

unit of the tractor.

INFORMATION

Alternatively, the hydraulic hoses (P/T) can be connected to a double-acting control unit.

Содержание Big Pack 1270

























































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1270

Отзывы:

Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 80 / 440

Результаты поиска

Содержание Big Pack 1270

Отзывы: