Krone Big Pack 1270 Скачать руководство пользователя страница 232

Страница: 232 / 440

Maintenance - Gearbox

19.6

Gearbox knotter fan

232

BiG Pack 1270

Original Operating Instructions 150000747_02_en

BP000-451

Comply with the safety routine "Safe execution of oil level check, oil and filter element
exchange",

refer to page 28

Checking oil level:

Thoroughly clean the area around the oil dipstick (1).

Turn out the oil dipstick (1), clean and turn in all the way. Use a lint-free cloth to clean the oil
dipstick.

Turn out the oil dipstick (1) and check the oil level.

If the oil level is indicated between the “X” and “Y” markings:

Turn in the oil dipstick (1).

If the oil level is indicated below the “Y” marking:

Top up oil via filling hole (1).

Check the oil level.

Change oil

A suitable container is available for escaping oil.

Turn out the oil dipstick (1).

Unscrew the oil drain plug (2) and drain the oil.

Screw in the drain plug (2), tightening torque

refer to page 206

Fill in new oil through the filling hole.

Check the oil level.

Содержание Big Pack 1270

























































































































































































































































































































































































































































Результаты поиска

Содержание Big Pack 1270

Отзывы:

Krone Big Pack 1270, Оригинальная инструкция по эксплуатации, Страница: 232 / 440

Результаты поиска

Содержание Big Pack 1270

Отзывы: