Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 81 / 448

Initial operation 7
Mounting fire extinguisher 7.8
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en 81
1
2
2
BP000-091
The inclination of the bale chute to gorund can be set via the length of the bale chute supporting
chain (2).
ü
The machine is parked on stable, solid and even ground.
ü
The bale chute has been lowered, refer to page 152 .
„ Shut down and safeguard the machine, refer to page 26 .
„
Adjust the nut (1) on both sides of the bale channel until the height of the bale chute back
egde is set appropriately.
For the "bale scale" version :
For “bale scale” version, the big bale is to rest temporarily on the bale chute so that it can be
weighed. For this reason, the inclination of the bale chute with “bale scale” version is to be set
less strong than the version without bale scale.
If the inclination of the bale chute is changed, the bale scale must be re-adjusted, refer to
page 172 .
7.8 Mounting fire extinguisher
1
BPG000-034
ü
The machine is shut down and safeguarded, refer to page 26 .
„ Replenish the fire extinguisher (1) according to the operating instructions of fire extinguisher
manufacturer.
ð
It the operating instructions of the fire extinguisher manufacturer are missing, consult
the homepage of the fire extinguisher manufacturer.
„ Insert the fire extinguisher (1) into the left support on the drawbar so that the operating
instructions on the type plate are readable and show to the outside.