Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 54 / 448

4 Machine description
4.17 Description of knotter gearbox functions
54
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
4.17 Description of knotter gearbox functions
BP000-071 / EQ000-072
Knotter gearbox in idle position
The knotter gearbox is in idle position if the trigger roller (1) is located in the recess of the cam
disc (2) of the knotter gearbox.
Tying process
For „double knotter“ version
The tying process consists of one rotation of the cam disc (2). The system automatically triggers
the knotting mechanism after the set bale length has been reached. In this process, the cam
disc rotates, presses the trigger roller out of the recess and continues to rotate until the trigger
roller slides into the recess again. While the cam disc rotates, the first knot (closing knot) is tied
at first and immediately after that the second knot (starting knot) is tied.
1st knot: Closing knot, ties the pressed big bale.
2nd knot: Starting knot, ties the initial knot for the next big bale.
Initiating the tying process manually
In case of maintenance, setting or repair work, the tying process can be manually initiated when
the tractor is not connected. The tying process is carried out by manually turning the flywheel
(3) in working direction (I);
refer to page 123 .
4.18 Description of bale ejector/bale chute functions
BPG000-021