manualshive.com logo in svg

Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Bellima F 130 Скачать руководство пользователя страница 69

Operation

8

Net wrapping

8.12

Bellima F 130

Original Operating Instructions 150000148_06_en

69

8.11.2

Dismounting/mounting the start device of the twine tying system

For the "Net wrapping and twine tying" version

RP000-133

Position

Designation

[I]

Start device (2) mounted

[II]

Start device (2) dismounted

Dismounting

If the twine tying system is not required for a longer period of time because net wrapping is
going to be used, the start device (2) can be dismounted.

„

Dismount the spring cotter pin (1).

„

Push the start device (2) in direction of the arrow out of the supports (3) and remove it.

„

Store the start device (2) in a clean, dry place.

Mounting

„

Push the start device (2) onto the supports (3) against the direction of the arrow.

„

Secure with a spring cotter pin (1).

8.12

Net wrapping

For the "Net wrapping" or "Net and twine tying" version

8.12.1

Inserting the net roll

To ensure that the sleeve clamp can hook completely into the sleeve of the net roll, a cardboard
sleeve should be used. If a plastic sleeve with grooves is used, the sleeve clamp may hook into
the grooves, transferring the brake force from the brake disc to the net roll. For this reason,
plastic sleeves without grooves are not recommended.

When using cardboard sleeves, make sure they are inserted in the correct position. Moisture or
high humidity may cause the cardboard sleeve to soften, impairing the tying functionality. Also
observe the information on the package provided by the tying material manufacturer.

INFORMATION

For trouble-free use in the field, KRONE recommends one of the "KRONE excellent" nets, see
label on the machine with the number 27 018 640 *.

Содержание Bellima F 130







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды