Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 107 / 134

Maintenance 11
Set and oil the drive chains 11.14
Bellima F 130
Original Operating Instructions 150000148_06_en 107
The drive chain of the pick-up is located on the left machine side.
Setting the drive chain
ü
The machine is shut down and safeguarded, refer to page 24 .
ü
The pick-up is lowered to working position, refer to page 62 .
Make the following settings equally on the right-hand and left-hand side of the machine:
„
Dismount the guard (1).
„
Loosen the screw connections (3).
„
Turn the tensioning device (2) at the support (4) until the drive chain is under tension.
„
Tighten the screw connections (3).
„ Mount the guard (1).
Oiling the drive chain
„ Moisten the drive chain with oil.
Consumables, refer to page 39 .
Replacing the shear bolt
RP000-206
To protect against overload, the drive chain of the pick-up is secured by a shearing bolt (4). This
shear bolt can be replaced when it is sheared off. Spare shear bolts (2) are located at the guard
(3). The shear bolt (4) (M8x35) can be ordered by stating the order number 00 900 201 *.
ü The guide wheel has been dismounted.
„
Dismount the holding-down clamp (1).
„ Dismount the guard (2).
„
If necessary, remove the residue of the shear bolt (4).
„
Mount a new shear bolt (4).