Krone AM 203 S Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 74

background image

Before the Start of the New Season

66

Pos: 31.4 /Überschriften/Überschriften 1/U-Z/Vor Beginn der neuen Saison @ 4\mod_1211272647559_78.docx @ 82867 @ 1 @ 1

13

Before the Start of the New Season

Pos: 31.5 /Überschriften/Überschriften 2/P-T/SSpeziell e Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1

13.1

Special Safety Instructions

Pos: 31.6 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Warnung - Repar atur_Wartung_R einig ungs_4 allgemein EasyC ut @ 292\mod_1410941423112_78.docx @ 2299026 @ @ 1

WARNING!
When performing repair, maintenance or cleaning work or in case of technical
intervention, drive elements may start moving (caution: cutting discs continue to run).

Effect: Danger to life, injuries or damage to the machine.
•  Turn off the PTO shaft.
•  Move the machine to the working position and lower it to the ground.
•  Switch off the engine of the tractor, remove the ignition key and carry it with you.
•  Secure the tractor against accidental start-up and against rolling.
•  After the repair, maintenance, cleaning work or technical modifications are completed,

mount all protective covers and safety devices properly again.

• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a physician

immediately.

• All other safety instructions must also be followed to avoid injuries and accidents.

Pos: 31.7 /Überschriften/Überschriften 2/P-T/PPr obel auf @ 0\mod_1196782963921_78.docx @ 14908 @ 2 @ 1

13.2

Test run.

Pos: 31.8 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Gefahr - Probel auf Einzahl Mähwer k muss auf Boden auflieg en @ 11\mod_1223615241207_78.docx @ 148217 @ @ 1

Danger! - Testing the machine after repair, maintenance or cleaning work and after
technical intervention.

Effect: Danger to life or serious injuries
• The mowing unit must be in working position
• Do not switch on the drives until the mowing unit is resting on the ground and you are

absolutely sure that neither persons, animals nor objects are in the danger zone.

• Start a trial run of the machine only from the driver’s seat.

Pos: 31.9 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
64
65
66
67
68
...
»

Содержание AM 203 S











































































Отзывы:

Нет отзывов

Похожие инструкции для AM 203 S

Бренд: Toro Страницы: 2

Бренд: Garland Страницы: 160

Бренд: Snapper Страницы: 8

Бренд: Oleo-Mac Страницы: 344

Бренд: Woods Страницы: 76

Бренд: Skil Страницы: 106

TZ51SF-BS625EXi

Бренд: MADER Страницы: 67

Бренд: Toro Страницы: 52

HS-7030 HITCH-N-SWEEP

Бренд: Parker Страницы: 6

Бренд: Worldlawn Страницы: 19

Бренд: Yazoo/Kees Страницы: 34

Greensplex 160 898850

Бренд: Ransomes Страницы: 36

SPE131KW, SPE151KW, SPE361, SP

Бренд: Snapper Страницы: 36

Бренд: MTD Страницы: 8

Бренд: Dolmar Страницы: 76

SILENT 40 EL 8211-3427-04

Бренд: Stiga Страницы: 8

Бренд: Makita Страницы: 252

Бренд: Makita Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды