Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 472 / 568

8 Terminal – menus [Medium Plus/Comfort Plus Electronics]
8.14 Menu 14 "ISOBUS"
66
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
8.14.3 Menu 14-3 "Configuring main window"
This menu can be used to set the information which is to be displayed in the lower information
line of the main window. Up to 5 display elements can be displayed simultaneously in the main
window. Each display element can be selected only once.
Depending on the machine configuration, up to 9 display elements can be selected which 5
display elements are to be displayed in the main window.
14-3
651 5,8
19
8
19
0,0 0
kg
EQ001-077 / EQ001-078
„
To open the menu, press .
Æ The display shows the "Configure main window" menu.
Recurring icons refer to page 43 .
Display range
Icon Designation Explanation
Show next display element
Show previous display
element
„
To select the required display element, press or .
ð
The display shows the new display element.
„ To save the new display element, press .
Æ
The new display element is saved for the information bar of the main window.
Selectable display elements
Depending on the machine configuration, the following display elements can be positioned in
the information bar of the main window,
refer to page 31 .
Icon Designation Explanation
Current PTO speed In min
-1
h
19
Operating hours counter Counts only when PTO shaft is running.
The adjacent number indicates the selected
customer counter (customer counter 19 in
the example).