Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 429 / 568

Foreign ISOBUS terminal 6
ISOBUS Shortcut Button not available 6.1
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
23
6 Foreign ISOBUS terminal
WARNING
Risk of injury caused by utilization of foreign terminal or other operation units
When using terminals and other operation units which have not been delivered by KRONE
mind that the user:
ü assumes the responsibility for the use of KRONE machines when using the machine on
operation units (terminal / other operating elements) which have not been delivered by
KRONE.
ü
only connects such systems (if possible) which have passed a AEF/DLG/VDMA test (so-
called ISOBUS COMPATIBILITY TEST).
ü has to follow the operating and safety instructions of the supplier of ISOBUS operation
unit (e.g. terminal).
ü
must ensure that the used operating elements and machine controls concerning IL (IL =
Implementation Level; describes compatibility levels of different software versions) must
fit together (condition: IL same or higher).
„
Before using the machine, make sure that all machine functions are performed according
to the enclosed operating instructions.
INFORMATION
KRONE ISOBUS systems regularly pass the ISOBUS COMPATIBILITY TEST (AEF/DLG/
VDMA test). The operation of this machine at least requires implementation level 3 of
ISOBUS system.
6.1 ISOBUS Shortcut Button not available
ISB ISB
1
EQG000-022
INFORMATION
No ISOBUS Shortcut Button available
If no ISOBUS Shortcut Button is available on ISOBUS terminals of other manufacturers, the
icon (1) is shown in the display. It is not possible to switch off machine functions via ISOBUS
Shortcut Button.
6.2 Varying functions to KRONE ISOBUS terminal
The job computer provides information and control functions of the machine on the display of
the external ISOBUS terminal. Operation with an external ISO terminal is similar to the KRONE
ISOBUS terminal. Prior to start-up, refer to the mode of operation of the KRONE ISOBUS
terminal in the operating instructions.