Krone 870 HDP Скачать руководство пользователя страница 307 | Manualshive

Страница: 307 / 568

Krone 870 HDP Скачать руководство пользователя страница 307

Maintenance

307

Pos: 98.28 /Ü berschriften/Ü berschriften 2/P-T/RR einigung @ 24\mod_1241504803133_78.docx @ 245455 @ 2 @ 1

20.6

Cleaning

Pos: 98.29 /BA/Sicherheit/6. Überar beitete Warnhinweise/Warnung - R einig ung mit Druckl uft_alt @ 0\mod_1196770018125_78.docx @ 13211 @ @ 1

Warning! -

Cleaning with compressed air!

Effect: Loss of eyesight!
• Keep people well away from the working area.
• Wear suitable work clothes to perform cleaning jobs with compressed air (for example eye

protection).

Pos: 98.30 /BA/War tung/Gr oßpackenpr essen/Rei nigung @ 24\mod_1241505488117_78.docx @ 245479 @ @ 1

The BiG PACK baler, especially the knotter, must be cleaned of chaff and dust after every use.

Under very dry working conditions, the cleaning must be repeated several times a day. The

packer control system and the flywheel must also be cleaned daily of chaff and dust.

Pos: 98.31 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für all e M aschinen/Handlungsanweisung: M aschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @ @ 1

• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting

down and safeguarding the machine".

Pos: 98.32 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
305
306
307
308
309
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов