Krone 870 HDP Скачать руководство пользователя страница 283 | Manualshive

Страница: 283 / 568

Krone 870 HDP Скачать руководство пользователя страница 283

Settings

283

Pos: 93.83.28 /BA/Ei nstellungen/Gr oßpackenpr esse/Presskol beneinstellung/Presskol ben i n Posi tion bringen T ext T2 all e H S T Ypen auß er 1290 HDP @ 192\mod_1382092469255_78.docx @ 1638910 @ 3 @ 1

19.15.4

Moving Baling Ram into Position

13

14

4

X

3

5

12

6

Fig. 207
Prerequisite:
– The packer strip is in position, refer to chapter Settings “Moving Packer Strip into Position”

Procedure

•  Remove the protection (13) of the chain coupling.
•  Remove the roller chain (14) from the chain coupling.
•  Release the flywheel brake.
•  Move the piston rod (3) to extended position (a) (rear dead point) by turning on the flywheel

(12) in the working direction.

•  Tighten the flywheel brake.
•  Position the roller chain (14) of the chain coupling and secure it.
•  Install the guard (13) on the chain coupling.
•  Remove the mounting lever.

Checking the setting:

• Release the flywheel brake
• Turn through the machine manually in the working direction one complete time on the

flywheel until the piston rod (3) is in its extended position (a) (rear dead point).

The packer (1) is correctly set to the baling ram (2) if the piston rod (3) is in its extended position

(a) and the large packer strip roller (4) running in front of the feeder strip (5) is X=6cm under the

control window (6). If this is not the case, set packer to baling ram again (refer to chapter

Settings “Setting Packer to Baling Ram“

).

Pos: 93.84 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
281
282
283
284
285
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов