Krone 870 HDP Скачать руководство пользователя страница 269 | Manualshive

Страница: 269 / 568

Krone 870 HDP Скачать руководство пользователя страница 269

Settings

269

Pos: 93.71 /BA/Ei nstellungen/Groß packenpresse/Garnbremse/Gar nspannung am ober en Garnstrang (Doppel knoter) @ 24 \mod_1240995388836_78.docx @ 241628 @ 3 @ 1

19.12.1

Setting the twine tension on the upper twine strand (double knotter)

Fig. 191
The upper strands of twine (1) should be held by the brakes (2) up to a tensile force of 100 -

120 N.
Before the twine brakes will allow the twine to slip through, the twine tension arm (3) should

move downward against the spring force until the twine (1) is guided through the eye of the

tension arm (4) almost without moving to the side.
Testing the twine tension:
• Tie the cord (1) onto a spring balance The spring balance has to indicate 100 - 120 N

shortly before the cord slips through.

You can increase the tension by turning the wing nut (5) tighter. To reduce the tension, loosen

the wing nut.
The dimension "X" is based on the tying twine selected and must be determined in each

individual case by testing in the twine strand. A pretension of the twine strand that is too high

may cause knotter errors and place too heavy a load on the components involved.

Pre-setting X = 65 mm

Pos: 93.72 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
267
268
269
270
271
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов