Krone 870 HDP Скачать руководство пользователя страница 238 | Manualshive

Страница: 238 / 568

Krone 870 HDP Скачать руководство пользователя страница 238

Operation

238

Pos: 89.19 /Ü berschriften/Ü berschriften 2/P-T/PPick up @ 1\mod_1201791975201_0.docx @ 54586 @ 2 @ 1

18.3

Pick-up

Pos: 89.20 /BA/Erstinbetriebnahme/Groß packenpressen/Absperrhahn Pick- up Bild mit Leg ende @ 155\mod_1363682181297_78.docx @ 1373728 @ @ 1

Fig. 157
Position (a) pick-up released

Position (b) pick-up locked

Pos: 89.21 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für all e M aschinen/Handlungsanweisung: M aschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @ @ 1

• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting

down and safeguarding the machine".

Pos: 89.22 /BA/Bedienung /Groß packenpresse/Pick- upBedi enung Pick- up heben / senken @ 356\mod_1438682024691_78.docx @ 2652425 @ @ 1

• To release the pick-up, open the stop cock (1) (position a).
• To lock the pick-up, close the stop cock (1) (position b).

Lower the pick-up

• To move the pick-up into the working position, move the single-acting control unit (

)

into the float position.

Raise the pick-up

• To move the pick-up into the transport position, actuate the single-acting control unit

(

).

Pos: 89.23 /BA/Ei nstellungen/Pick-up / R ollenni ederhalter/Hinweis Fahren i m Vorg ewende @ 20\mod_1238578490213_78.docx @ 221874 @ @ 1

Note

Lift the Pick-up for driving in the headland or when driving backward!

Pos: 89.24 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
236
237
238
239
240
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов