Krone 870 HDP Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 568

Krone 870 HDP Скачать руководство пользователя страница 128

Driving and Transport

128

Pos: 81.70.1 /Ü berschriften/Ü berschriften 2/U-Z/V/Vor ber eitung der Maschi ne für di e Beför der ung @ 395\mod_1446625169194_78.docx @ 2815316 @ 2 @ 1

10.5

Preparing the machine for transportation

Pos: 81.70.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/Achtung - Maschi nenschaden durch nicht gesicherte bewegliche Maschi nenteile bei m Tr ansport @ 395\mod_1446618988846_78.docx @ 2815285 @ @ 1

CAUTION!

Risk of machine damage due to unsecured moving machine parts

When transporting the machine on transportation vehicles (e.g. trucks or trains), excessive

bursts of air may damage it.
• Carry out the following measures to secure moving machine parts.

Pos: 81.70.3 /Ü berschriften/Ü berschriften 3/P-T/SSeitenschutze sichern @ 382\mod_1444194239996_78.docx @ 2753186 @ 3 @ 1

10.5.1

Securing side guard

Pos: 81.70.4 /BA/F ahr en und Transport/Gr oßpackenpr esse/Transport/Seitenschutze sichern_Bild_BP @ 382\mod_1444195263444_78.docx @ 2753471 @ @ 1

1

3

2

4

BPHS0323

Fig. 83

Pos: 81.70.5 /BA/F ahr en und Transport/Gr oßpackenpr esse/Transport/Seitenschutze sichern_T ext_BP @ 382\mod_1444195480653_78.docx @ 2753533 @ @ 1

On the right and left sides of the machine:
•  Open the side guard (1).
•  Feed a cable tie (2) through the openings of the flap lock (3).
•  Close the side guard (1).
•  Place the cable tie (2) around the lock (4) and tighten.

Pos: 81.70.6 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
126
127
128
129
130
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов