KRONAsteel KIRSA 500, Лист приложения

Страница: 4 / 24

2
EN Application sheet
KITCHEN HOODS
This product is marked in accordance with the European
Directive 2002/96/EU on waste electrical and electronic
equipment (WEEE).
By ensuring correct disposal of this product, you will help
to prevent potential negative consequences for the envi-
ronment and human health.
The symbol on the product or in the supporting docu-
mentation specifies that you cannot treat this product
as common household waste during disposal. Instead, it
should be taken to the relevant waste electric and elec-
tronic equipment station for further disposal.
Scrapping should comply with the local waste disposal
rules.
Contact the local authorities, waste disposal service or the
shop where you bought the product for more detailed in-
formation about the rules of such products treatment, dis-
posal and processing.
LIST OF EQUIPMENT
Package contents:
1. Body hood with decorative glass assembly – 1 pc.
2. Decorative air duct hood – 2 pcs.
3. A strip for fixing to the wall the inner part of the decorative air duct hood – 1 pc.
4. Flexible duct length 1.5 m – 1 pc.
5. Flange with anti-return valve – 1 pc.
6. A set of fixture the hood to the wall – 1 pack.
7. Instruction – 1 pc.
(* Package contents are subject to change without notice
TECHNICAL CHARACTERISTICS
Model KIRSA KIRSA sensor
Overall dimensions of the hood, mm:
Width
500/600
Depth
345
Height (min-max)
800-1180
Diameter of outlet
120
Weight (net), kg
12,8
Voltage in the network / Frequency
220–240 V~ / 50–60 Hz
Power consumption, W:
Engine
170
Lamps 2 x 2 W, LED
Number of ventilation speeds
3
Control
Push-button / mechanical touch control
For the User
ATTENTION! Install and operate the device in
accordance with the Instructions.
Important notes
This kitchen hood is to be used by households
only. Use for other conditions is inadmissible,
and warranty does not cover such cases.
Before installation and film removal, make sure
that the kitchen hood functions in all working
modes (See the Kitchen Hood Installation sec-
tion).
All works related to installation, connection and
repairs should only be performed by qualified
technicians specializing in the product.
The manufacturer is not liable for any failures
and breakdowns that are related to wrong instal-