background image

GB-6

D

GB

F

NL

I

E

Contact

If you have any technical questions, please contact 
your local branch office/agent. The addresses are 
available on the Internet or from Elster GmbH.

We reserve the right to make technical modifications 

in the interests of progress.

Elster GmbH

Strotheweg 1, D-49504 Lotte (Büren)

Tel. +49 541 1214-0

Fax +49 541 1214-370

[email protected], www.kromschroeder.com

Contact

Mechanical data

Dimensions (W × H × D):
96 × 63 × 23 mm (3.78 × 2.48 × 0.91 inch).
Weight: 0.3 kg.

Electrical data

Power consumption: 1.2 VA.
Power loss: 0.7 W.

Designed lifetime

Max. service life under operating conditions:
20 years after date of production.

Logistics

Transport

Protect the unit from external forces (blows, shocks, 
vibration). 

Transport temperature: see page  5 (Technical 

data). 

Transport is subject to the ambient conditions de-

scribed. 
Report any transport damage on the unit or packag-
ing without delay. 
Check that the delivery is complete, see page 
(Part designations).

Storage

Storage temperature: see page 5 (Technical data). 
Storage is subject to the ambient conditions de-
scribed. 
Storage time: 6 months before using for the first 
time. If stored for longer than this, the overall service 
life will be reduced by the corresponding amount of 
extra storage time.

Packaging

The packaging material is to be disposed of in ac-

cordance with local regulations.

Disposal

Components are to be disposed of separately in 
accordance with local regulations.

Certification

ODVA compliant

Scan of the Declaration of conformity (GB) – see 
www.docuthek.com

PROFIBUS User Organization

The PROFINET IO device BCU 4xx with BCM 400 has 

successfully passed the certification tests, according 
to certificate No. Z12594.

Содержание BCM 400 B2 Series







Отзывы: