Kromek D3S ID Скачать руководство пользователя

Страница: 49 / 52

MAL-OPS-0927 Revision 4.0 Page 49 of 52

12 Disclaimer

To the best of its knowledge Kromek has made all reasonable efforts to ensure

the information in this manual is without error and complete. Kromek shall not

be held liable for any errors or omissions contained within this document, or for

incidental, special or consequential damages related to the use of this

document.

The information contained in this document shall be subject to change without

notice.

12.1 FCC Warning

The D3S device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. The device may not cause harmful interference

2. The device must accept any interference received, including interference

that may cause undesired operation.

12.2 Versions Document

This document was correct at the time of publication and was written for the

version numbers below:

D3S Hardware: 1.1

D3S Firmware: 3.75

D3S ID App Version: 2.2.0

Содержание D3S ID





















































Результаты поиска

Содержание D3S ID

Отзывы:

Похожие инструкции для D3S ID

Бренды по названию

Популярные бренды

Kromek D3S ID, Руководство пользователя

Результаты поиска

Содержание D3S ID

Отзывы:

Похожие инструкции для D3S ID

Бренды по названию

Популярные бренды