manualshive.com logo in svg

krom schroeder TC 1, Руководство по эксплуатации

Поделиться
Скачать
krom schroeder TC 1 Скачать руководство пользователя страница 12

TC 1, TC 2, TC 3 · Edition 07.22

EN-12

14.7 ReACH Regulation

The device contains substances of very high concern 

which are listed in the Candidate List of the European 
REACH Regulation No. 1907/2006. See Reach list 
HTS at www.docuthek.com. 

14.8 China RoHs

Directive on the restriction of the use of hazardous sub-
stances (RoHS) in China. Scan of the Disclosure Table 
China RoHS2, see certificates at www.docuthek.com. 

15 DIsPosAL

Devices with electronic components:

Weee Directive 2012/19/eU – Waste electrical 
and electronic equipment Directive

 

At the end of the product life (number of op-

erating cycles reached), dispose of the pack-
aging and product in a corresponding recycling 
centre. Do not dispose of the unit with the usu-
al domestic refuse. Do not burn the product.  
On request, old units may be returned carriage paid 
to the manufacturer in accordance with the relevant 
waste legislation requirements. 

© 2022 Elster GmbH 

We reserve the right to make technical modifications in the interests of progress.

The Honeywell Thermal Solutions family of products includes 

Honeywell Combustion Safety, Eclipse, Exothermics, Hauck, 

Kromschröder and Maxon. To learn more about our products, visit 

ThermalSolutions.honeywell.com or contact your Honeywell Sales 

Engineer.  

Elster GmbH  

Strotheweg 1, D-49504 Lotte  

T +49 541 1214-0  

[email protected]  

www.kromschroeder.com  

 

Global centralized service deployment coordination:  

T +49 541 1214-365 or -555 

[email protected] 

Translation from the German

FoR MoRe InFoRMAtIon

Содержание TC 1













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды