KROHNE OPTISENS ODO2000, Руководство пользователя

Страница: 38 / 52

5
OPERATION
38
OPTISENS ODO 2000
www.krohne.com 10/2016 - 4003689502 - MA OPTISENS ODO 2000 R02 en
5.3.8 Sensitivity calibration
Command Format: ID + S
^
For example, if ID = 14, type 14S
^
or 00S
^
To check whether the entered value was received, type the command 'A'.
5.3.9 Zero point calibration
Command Format: ID + Z
^
For example, if ID = 14, type 14Z
^
or 00Z
^
To check whether the entered value was received, type the command 'A'.
5.3.10 Last calibration date
Command Format: ID + D + cccccccc
^
For example, if ID = 14, and we need to set the date 13/11/10, type 14D13/11/10
^
or 00D13/11/10
^
The Command is for memorising the last calibration date.
The operator can use the 8 characters as he likes better (no syntaxes limitation).
5.3.11 ID value
Command Format: ID + I + x
^
For example, if ID = 14, and we need to set the ID at 07, type 14I07
^
or 00I07
^
The new ID will be available from the next start up of the probe.
Probe response: ID + S + x command executed correctly
Probe response: none command does not run properly
Probe response: ID + Z + x command executed correctly
Probe response: none command does not run properly
Probe response: ID + D + cccccccc command executed correctly
Probe response: none command does not run properly
Probe response: ID + I + x command executed correctly
Probe response: none command does not run properly