For initial set up, we strongly recommend that you also refer to the relevant manual!
Installation conditions
- No special requirements
1
Device versions: Small, Medium and Large size
1
2
2
03/2022 - 4009292701 - FLEXMAG 4050 C R01 en
1
Available size of tubes: ID ¼...1"
2
Move the tube horizontally into the transmitter
Push the clamp downward until a "click" is noticed
Vertical down position only in conjunction with a control valve
Quick Start
FLEXMAG 4050 C
1
Installation
Single use electromagnetic flowmeter
Installation, assembly, start-up and maintenance may only be performed by appropriately trained personnel.
General installation requirements
This instrument complies with requirements of Low Voltage Directive. Instruments must not be connected to power
supply before reading instructions described in the manual.
Avoid vibration / EM field
Pump, control valve - open feed / discharge
Device version(s)
Transport
- Use the original packing of the device(s) when
transporting to the installation location.
The responsibility as to the suitability, intended use and corrosion resistance of the used materials against the
measured fluid of this device rests solely with the operator.
General
Device nameplate (example)
Check the device nameplate to ensure that the
device is delivered according to your order
∠α
> 2°
