manualshive.com logo in svg

Krautzberger HS 25 Series, Руководство по эксплуатации, Страница: 4 / 29

Поделиться
Скачать
Krautzberger HS 25 Series Скачать руководство пользователя страница 4

1  Safety

Safety instructions

 DANGER!

This combination of symbol and signal word indicates an immediately dangerous situation
which causes death or severe injuries if it is not avoided.

 WARNING!

This combination of symbol and signal word indicates a possibly dangerous situation which
can cause death or severe injuries if it is not avoided.

 CAUTION!

This combination of symbol and signal word indicates a possibly dangerous situation which
can cause slight injuries if it is not avoided.

 NOTICE!

This combination of symbol and signal word indicates a possibly dangerous situation which
can cause property and environmental damage if it is not avoided.

This symbol highlights useful tips and recommendations as well as information for efficient
and fault-free operation.

Symbol

Explanation

Indicates step-by-step instructions.

ð

Indicates a condition or an automatic sequence as the result of an action.

Indicates references to sections of these instructions and other applicable
documents.

Indicates enumerations and list entries without a specified sequence.

Operating instructions

T-Dok-009-GB-Rev.0

[email protected], www.krautzberger.com

 

GB–4

Содержание HS 25 Series






























Отзывы:

Нет отзывов