Krautzberger 200-0356, Руководство по эксплуатации

Страница: 29 / 45

5. Coat thread of the screws ( Fig. 17/25) with screw adhesive (e.g. Loctite 274).
6. Position bracket ( Fig. 17/23) as illustrated.
7. Screw in turbine housing ( Fig. 17/2) with the screws ( Fig. 17/25) and discs ( Fig. 17/26) at
the bearing cover (tightening torque:
Ä
Chapter 12 ‘Technical data’ on page 39 ). Ensure
that the sealing ( Fig. 17/24) will not be damaged during the process.
8. Use Loctite 638 screw adhesive to glue control wheel ( Fig. 17/11) onto the shaft of the tur-
bine wheel ( Fig. 17/3).
Assembling gear box
Fig. 18: Assembling gear box
9. Insert pressure disc ( Fig. 18/8), spring washer ( Fig. 18/9), and gear wheel ( Fig. 18/6) onto
the shaft of the turbine wheel ( Fig. 18/3) and screw in with the nut ( Fig. 18/7) (tightening
torque:
Ä
Chapter 12 ‘Technical data’ on page 39 ).
Pneumatic agitator RL 72
ENGLISH
Article no. ■ 200-0356 GB–29