Krautzberger 200-0148, Руководство по эксплуатации

Страница: 36 / 49

9 Troubleshooting
Personnel:
n Qualified personnel
If the fault is not included in the following tables or if it cannot be eliminated with the measures
described, contact Krautzberger Customer Care.
Troubleshooting table
Spray pattern Error Cause Remedy
Normal flat jet spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom n Dirty air nozzle
n Dirty fluid nozzle
n Clean nozzles (
Ä Chapter 8.3
‘Cleaning the
automatic spray
gun’ on page 29
).
Spray pattern concen-
trated on the left or
right side n Dirty air nozzle
n Dirty fluid nozzle
n Clean nozzles (
Ä Chapter 8.3
‘Cleaning the
automatic spray
gun’ on page 29
)
Heavy application in
the centre of the spray
pattern n Too much mate-
rial n Reduce material
supply
n Material too thick n Thin material
Split spray pattern n Insufficient mate-
rial n Increase material
supply
n Flat jet air pres-
sure too high n Reduce flat jet air
pressure
Operating instructions
T-Dok-040-GB-Rev.5
mail@krautzberger.com, www.krautzberger.com GB–36