background image

ClimTec

®

GB

  Table of Contents

1. General ............................................................................................................. 36

1.1 Owner’s responsibilities ............................................................................... 36
1.2 Manufacturer ............................................................................................... 36
1.3 Applicable standards .................................................................................... 36
1.4 Warranty ...................................................................................................... 36
1.5 Intellectual property rights ........................................................................... 36
1.6 Publication date ........................................................................................... 36

2. Product information ......................................................................................... 37

2.1 Intended use ................................................................................................ 37
2.2 Improper use ............................................................................................... 37

3. Safety instructions ........................................................................................... 37

3.1 Applicable regulations .................................................................................. 37
3.2 Safety instructions for assembly and use ..................................................... 37
3.3 Safety instructions for moving the ClimTec

®

 ................................................. 38

3.4 Inspection to be performed after moving ClimTec

®

 

or changing its configuration  ....................................................................... 38

4. Assembly .......................................................................................................... 38

4.1 General ........................................................................................................ 38
4.2 Assembling the basic scaffold  ..................................................................... 39
4.3 Basic scaffold with 1 extra level, 5 metre working height  ............................ 41
4.4 Basic scaffold with 1 and 2 extra platform(s), 7 metre working height  ......... 48
4.5 Setting up the ClimTec

®

 on stairs  ................................................................ 56

4.6 Attaching ballast to the ClimTec

® 

 ................................................................. 60

4.7 Fitting the outriggers (accessory)  ................................................................ 60
4.8 Attaching the ClimTec

®

 to a wall  ................................................................. 64

4.9 Labelling after assembly  ............................................................................. 64
4.10 Accessories ............................................................................................... 65

5. Disassembling ClimTec

®

 .................................................................................. 66

6. Technical data .................................................................................................. 66

7. Inspection, spare parts .................................................................................... 66

8. General safety information ............................................................................ 643

Assembly Instructions and User Manual DIN EN 1004-2
Mobile scaffold tower in accordance with EN 1004-1 • Version 1.0 © 2022 KRAUSE-Werk

ClimTec

ClimTec

® 

® 

Scaffold Tower

Scaffold Tower

The information presented in this document is subject to changes, printing errors and omissions.  

EXTRAS and work equipment are not included with the scaffold tower! • We do not accept any liability for improper  

use of the scaffold tower. • Only use original KRAUSE spare parts.

Содержание ClimTec 710116C0

































Отзывы: