14
15
General rules
This is prohibited !
Never direct the
water jet at
people or animals !
Do not damage
the power cord
or repair it
incorrectly !
Inspections:
The machine must be inspected according to the "Guidelines for Liquid
Spray Devices" at least once every 12 months by a qualified person, to
ensure that continued safe operation is guaranteed. The results of the
inspection are to be recorded in writing. This may be done in any form.
Accident prevention
The machine is designed for accidents to be impossible if used correctly.
The operator is to be notified of the risk of injury from hot machine parts and
the high pressure water jet. The "Guidelines for Liquid Spray Devices" must
be complied with. (See page 13 + 14)
Please pay attentions to the regulations of your waterworks company.
(Reflux valve with tube ventilation according to DIN 1988)
Check the oil level at the oil sight glass prior to each use.
(Ensure horizontal position !)
Oil change:
No oil change is required during the working life of the machine. We would
suggest though to change the oil after having used the high pressure clea-
ner for a longer period of time to ensure its longevity. Should it be necessary
to change the oil the oil sight glass is to be opened over a reservoir and the
machine to be emptied. The oil is to be caught in the reservoir and disposed
of in the approved manner.
New oil: 0,25 l - Motor oil W 15/40
Never pull the high
pressure hose if it has
formed kinks or "nooses" !
Never pull the hose
over sharp edges !
Warranty
This warranty covers material and/or workmanship related defects only and does
not extend to ordinary wear.
Machine must be operated according to enclosed operating instructions which are
part of present warranty conditions.
All products sold directly to private customers are warrantied for a period of 24
months, whereas the warranty period for industrial purchases is limited to 12
months.
In case of any warranty claims, please have your HP cleaner together with
accessories and your purchase document ready and contact your nearest dealer or
authorized service point which can also be looked up in the internet at
www.kraenzle.com .
Warranty is void in case of attempts to modify any of the safety devices or in the
event of exceeding temperature or rpm limits - this also applies to undervoltage, low
water and/or polluted water. Gauge, nozzle, valves, sealing gaskets, high pressure
hose and spray equipment are considered wear parts and do not fall under this
warranty.
