Kramer WP-5VH2, Руководство пользователя

Страница: 10 / 101

4 WP-5VH2 - Overview
3 Overview
The
WP-5VH2
accepts an HDMI and PC graphics video input, an Ethernet signal,
serial data, and an unbalanced stereo audio input (which is embedded into the
output signal), and transmits the signal via HDBaseT (Twisted Pair) cable to a
compatible receiver (for example, the
TP-588D
or the
TP-580RXR
). The
WP-5VH2
is a PoE (Power over Ethernet) receiver and can be powered by a
compatible PoE provider, (for example, the
PSE-1
).
The
WP-5VH2
provides a range of up to 130m (427ft) in normal mode for
1080p@60Hz @36bpp. When using an extended range receiver and
BC−HDKat6a
cables, the range is up to 180m (590ft) for 1080p@60Hz @24bpp.
To use the
WP-5VH2
in extended range mode you must edit the EDID.
For optimum range and performance, use Kramer's
BC−HDKat6a
and
BC−DGKat7a23
shielded twisted pair (STP) cables. Note that the
transmission range depends on the signal resolution, graphics card and
display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7
cables may not reach these ranges.
In particular the
WP-5VH2
features:
 Support for 4K, (a data rate of up to 10.2Gbps)
 Automatic input selection based on priority selection or last connected input
 Manual input selection
 Automatic live input detection based on video clock presence
 Automatic analog audio detection and embedding
 Power over Ethernet passes electrical power along with data on Ethernet
cabling. This allows a single cable to provide both data connection and
electrical power to compatible devices
 Control via Kramer Protocol 3000 and embedded Web pages over a LAN
 HDTV support
 HDMI with Deep Color, x.v.Color™ and 3D
i