Kramer Electronics Ltd.
VW-4
– Configuring VW-4
23
3. View the video-wall layout in the Preview window.
Figure 22: Video-wall Preview
The Preview window displays the selected video-wall size and each display in the video-wall
is tagged by the device number. For example:
•
“0” is the ID number of the first
VW-4
in the wall
(“0-192.168.1.38” as defined via settings tab).
•
“1” is the ID number of the second
VW-4
in the wall
(“0-192.168.1.42” as defined via settings tab).
•
1 to 4 indicate the HDMI outputs.
Video-wall layout is defined.
Setting Bezel Corrections
Enter horizontal and vertical bezel corrections (in pixels).
To define bezel corrections:
2. Click Bezel
Off
to set its status. Bezel status changes to
On
.
Figure 23: Bezel Status On
3. Enter horizontal and vertical bezel corrections (in pixels) as required for the defined
video-wall setting.
Bezel corrections are defined.