Kramer VS-88UHD Скачать руководство пользователя страница 21

Страница: 21 / 78

Kramer Electronics Ltd.

VS-88UHD – Operating VS-88UHD via Front Panel Buttons

Setting HDCP

You can enable or disable HDCP for each of the HDMI inputs.

To set HDCP on or off:

1. Press and hold

EDID

and

RCL

until both buttons illuminate.

The IN buttons indicate the HDCP status:



HDCP enabled (on): IN button is illuminated.



HDCP disabled (off): IN button is off.

2. Press one or more input buttons to change their status.

The

LOCK

button flashes.

3. Press

LOCK

to save changes and exit the HDCP mode.

Copying the EDID

You can copy the EDID to an input from a connected output or use the default EDID.

To copy the EDID from a connected output:

1. Press and hold

EDID

and

STO

until both buttons illuminate.

VS-88UHD

enters the EDID mode and the 7-segment display shows the current EDID

status:

On the front panel button:



Both input and output buttons are dark.

On the 7-segment display:



“

” under an output number indicates that the input port is set to the default EDID.



“

” under an output number indicates that

the EDID was uploaded externally from a

file via Web page.



A digit under an output number indicates the output from which the EDID was copied.

2. Press one or more input buttons (or

ALL

The 7-segment display LEDs of the selected inputs flash.

3. Press an output button (with a connected display) from which to copy the EDID.

4. Press

EDID

Wait for about 5 seconds for the device to copy the EDID from the connected display.

Проконсультироваться

купить

данное

оборудование

вы

можете

компании

АНД

Системс

адрес

: 125480,

Москва

ул

Туристская

.33/1; site: https://andpro.ru

тел

: +7 (495) 545-4870 email: [email protected]

При

обращении

используйте

промокод

AND-PDF

получите

скидку

Содержание VS-88UHD















































































Результаты поиска

Содержание VS-88UHD

Отзывы:

Бренды по названию

Популярные бренды

Kramer VS-88UHD, Руководство пользователя

Результаты поиска

Содержание VS-88UHD

Отзывы:

Бренды по названию

Популярные бренды