Kramer Electronics Ltd.
VS-88UHD – Operating VS-88UHD via Front Panel Buttons
18
If a setup is stored in the selected setup button, the corresponding 7-segment display LED
flashes. If nothing is stored the 7-segment LED is on.
3. Press
RCL
.
The recalled setup is applied and the RCL button no longer illuminates.
You need to press
RCL
within 10 seconds, to apply settings.
Setting the Switching Mode
Set the following
switching modes separately for each output:
Manual mode (
IN 1
): inputs are switched to outputs via the front panel buttons.
Priority mode (
IN 2
): the
VS-88UHD
switches the source with the highest priority to the
output
.
Last connected mode (
IN 3
): the last detected active source is switched to the output.
To select the switching mode:
1. Press
RCL
and
MUTE/PATTERN
simultaneously. Both buttons illuminate.
2. Press an output button (or press
ALL
).
The corresponding 7-segment display LEDs flash and
LOCK
button flashes.
3. Press
IN 1
,
IN 2
or
IN 3
.
4. Press
LOCK
to save the settings to that output and exit Switching mode.
Setting the Switching Speed
Set the following switching speed modes separately for each output:
Ex-Fast switch speed (
IN 1
).
Fast switch speed (
IN 2
).
Normal switch speed (
IN 3
).
To select the switching speed:
1. Press
STO
and
MUTE/PATTERN
simultaneously. Both buttons illuminate.
The 7-segment display LEDs show the current switch speed for each port.
2. Press an output button (or press
ALL
).
The corresponding 7-segment display LEDs flash and
LOCK
button flashes.
3. Press
IN 1
,
IN 2
or
IN 3
.
4. Press
LOCK
to save the settings and exit Speed mode.
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: [email protected]
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.