Kramer VS-6464DN-EM, Руководство пользователя

Страница: 28 / 94

Kramer Electronics Ltd.
VS-6464DN-EM
– Using the Configuration Menus
26
After a few seconds, the following is displayed on the right hand side:
CONFIRM
RECALL <= 02
The TAKE button flashes.
4. Press TAKE.
The preset is recalled. The display reverts to the output/input display.
Using the Config Menu
The Config Menu provides access to configuration settings that are not regularly changed and
comprises the following options:
•
Input signal detection display ( Config Menu
—Input Signal Detection Display
on page 27 )
•
Input port parameter setting ( Config Menu
—Setting Input Port Parameters
on page 27 ).
•
Output load detection display (see Config Menu
—Output Load Detection Display
on page 28 ).
•
Output port parameter setting ( Config Menu
—Setting Output Port Parameters
on page 29 ).
•
Storing the default setup ( Config Menu
—Store Default Setup
on page 30 ).
•
Total matrix reset ( Config Menu
—Total Matrix Reset
on page 30 ).
•
Display firmware versions ( Config Menu
—Display Firmware Versions
on page 31 ).
To enter the Config Menu:
•
Press MENU twice. The MENU button lights and the following message is displayed:
Start configuration menu
MENU to view setups ENTER to change them
When browsing through the configuration menu, enabled buttons light or flash.
Use the Config Menu as follows:
1. Press the MENU button to cycle through the menu items.
The LCD display shows the current status of the selected menu item.
2. Press the ENT button to enter a submenu.
3. After entering a submenu, you can select between several options.
Select an option by pressing one of the illuminated buttons in the Selector Buttons area.
4. After selecting the desired option, a description of the desired change is displayed and
the TAKE button flashes.
5. Press the flashing TAKE button to confirm the change.
A description of the current state is displayed for about one second. The unit
automatically switches to the next item in the menu.