Kramer VS-62H, Руководство пользователя

Страница: 25 / 51

Kramer Electronics Ltd.
VS-62H
– Operating the VS-62H Remotely via the Web Pages
23
Switching an Input to an Output
To switch an Input to an Output, (for example, Input 2 to Output 2):
1. Click on Output button 2.
The button changes color to purple and the Output is selected.
2. Click on Input button 2.
The button changes color to purple and the output is switched.
Controlling a Remote Transmitter
Compatible remote transmitters, (for example, the SID-X3N or the DIP-31 ) that are connected
to the VS-62H can be controlled using the Web pages, (see Routing Page on page 21 , Figure
14 ).
Figure 15: The Remote Device Control Window
The VS-62H allows you to program the general purpose buttons on remote modules. The
table shows the functionality defined for each button. The options are:
•
HDMI, DP, DVI, PC
—selects one of the inputs
•
Echo
—allows a connected controller to be programmed to perform a variety of tasked
triggered by the user buttons, such as, room control, (lights, screen, and so on)
•
Out 1
—step-in current input to output 1
•
Out 2
—step-in current input to output 2
Note : These settings are per input and remain valid even if the remote SID-X3N is exchanged
for another SID-X3N .
Up to three of the Echo, Out 1 and Out 2 buttons can be active at the same time.