VS-62DT - Operating the VS-62DT 6x2 UHD Matrix Switcher
17
Note
: If there is no button activity for 10 seconds, the device automatically exits the
EDID setting mode to normal operation, the EDID button no longer lights and any
changes made are lost.
2. From the To OUT 1 (top) row, press each of the Inputs to which you want to
copy the EDID from Output 1.
Each selected Input LED lights.
3. From the To OUT 2 (bottom) row, press each of the Inputs into which you
want to copy the EDID from Output 2.
Each selected Input LED lights.
4. Press the EDID button.
The button no longer lights and the EDID changes are saved.
To copy the default EDID to one or more Inputs
:
1. Press the EDID button to enter the EDID setting mode.
The EDID button lights.
2. For each Input to which you want to copy the default EDID, press both the
To OUT 1 and To OUT 2 buttons simultaneously.
Both top row and bottom row Input LEDs light.
3. Press the EDID button.
The button no longer lights and the EDID changes are saved.
7.3
Controlling Analog Audio
Control analog audio using volume, mute and swap buttons.
To change the volume on a selected analog audio output:
•
Press VOL+ to increase the volume.
•
Press VOL- to decrease the volume.
