Kramer Electronics Ltd.
UHD Matrix Switcher
– Technical Specifications
55
Default Communication Parameters
RS-232/Ethernet
Baud Rate:
115,200
Parity:
None
Data Bits:
8
Command Format:
ASCII Protocol 3000
Stop Bits:
1
Example (Route input 1 to output 1):
#VID1> 1<cr>
Ethernet Parameters
IP Address:
192.168.1.39
Default TCP Port #:
5000
Subnet Mask:
255.255.0.0
Default UDP Port #:
50000
Default Gateway:
192.168.0.1
Number of TCP ports:
8
Number of web clients:
5
Full Factory Reset
Front Panel Buttons:
Power off the device, press and hold the LOCK, EDID and STO buttons simultaneously for
about 3 seconds while powering the device, and then release. Until all front panel buttons
illuminate
Protocol 3000:
“#factory” command.
Web Pages:
In the Device Settings page, click
Reset
.