Kramer Electronics Ltd.
UHD Matrix Switcher
– Using the Embedded Web Pages
43
Setting the Timeout
Use the
Timeout Settings
Web page to set the time delay to shut down if no input signal is
detected for each output and also to set the auto switching time.
Always set the 5V cut-off (Disable 5V) time delay to be longer than the video signal loss
timer delay.
To set the timeout:
1. In the Navigation pane, click
Timeout Settings
. The Timeout Settings page appears.
Figure 50: Timeout Settings Page
2. Set the specific output delay time.
If you do not want a specific output to shut down if an input signal is not detected, check the
Never
box
next to the desired output.
3. Set audio support
ON
if you want shutdown to occur only if an audio signal is lost.
Support audio only
can be used if the video and audio signals routed to an output, come from
separate sources.
If
Support audio only
is set to:
ON
– The audio signal routed to the output remains active when the video source (coming from a
different input) is deactivated.
OFF
– The audio signal routed to the output is deactivated together with the deactivation of the video
source (coming from a different input).