Kramer VS-48H2, Руководство пользователя

Страница: 43 / 83

Kramer Electronics Ltd.
VS-88H2
–
Using Embedded Web Pages 41
Performing a Factory Reset
To reset the device to its factory default values:
1. In the Navigation pane, click Device Settings .
The Device Settings page appears ( Figure 29 ).
2. Click Reset . The following window appears:
Figure 30: Device Settings Page
– Factory Reset
3. Click OK to start factory reset and follow the instructions on-screen.
This feature can also be performed manually on VS-88H2 :
•
Press and hold the Reset Button ( Figure 5 ) while powering the device to reset IP
settings to factory default values.
Performing Firmware Upgrade
•
This section contains information on upgrading the firmware using webpages. For
information on upgrading the firmware using By USB or RS-232 using Kramer
K-UPLOAD tool, go to Kramer Web site at www.kramerav.com/downloads/VS-88H2 .
To perform firmware upgrade:
1. In the Navigation pane, click Device Settings .
The Device Settings page appears ( Figure 29 ).
2. Click BROWSE and select the new firmware file.
3. Click START UPGRADE and follow the instructions on-screen.
Do not power off your device while you are uploading a file to prevent the damage of the
file.
18