Kramer Electronics Ltd.
VS-34FD
– Operating and Controlling – Embedded Web Pages
30
To set HDBT range:
•
On the Port Information panel, under XTRA, select one of the following:
▪
ON
– HDBaseT ultra-long range (to enable increased range at a reduced bandwidth).
▪
OFF
– HDBaseT normal range.
Actual ranges depend on the resolution of signal. See the card technical specifications
for more information.
Configuring Compression Level
These settings apply to the following input/output cards:
•
DTAxrC2-IN2-F34 / DTAxrC2-OUT2-F34
To configure compression level:
•
On the Port Information panel, under XTRA, select one of the following:
▪
Standard
▪
High
Configuring Compression Resolution
These settings apply to the following input/output cards:
•
DTAxrC2-IN2-F34 / DTAxrC2-OUT2-F34
To configure compression level:
•
On the Port Information panel, under XTRA, select one of the following:
▪
>1080P
– Compress signal resolutions higher than 1080p.
▪
ALL
– Compress all signal resolutions to enable extended reach.
