Kramer Electronics Ltd.
VS-3232DN-EM
– Operating Your Video Matrix Switcher
23
Alternatively, you can perform a switching operation (see
) and set the input to 00.
Turning Off Several Outputs
To turn off several outputs in the Confirm mode, repeat the switching actions described in
Switching Several Inputs to Several Outputs
Recalling the Default Setup
You can store a commonly used setup as the default setup (see
) which can be recalled at any time.
This is not the setup that is loaded when the unit is turned on. When the unit is turned on, the
setup that was last used before the unit was turned off is loaded.
To recall the default setup:
1. Press DEFAULT SETUP.
The DEFAULT SETUP button flashes and the following message is displayed:
recall DEFAULT setup
press FLASHING button to confirm
2. Press DEFAULT SETUP.
The following message is displayed:
all Setups and Connections change
press TAKE to confirm
The TAKE button flashes.
3. Press TAKE.
The default setup is recalled and the display reverts to the output-input display.
Locking the Front Panel Buttons
You can lock the
VS-3232DN-EM
to prevent tampering with the unit or prevent the settings
from being changed accidentally via the front panel buttons. When the front panel is locked,
you can still remotely operate the
VS-3232DN-EM
via RS-232 or Ethernet.
To lock the front panel buttons:
•
Press and hold LOCK until the button lights.
The front panel buttons are locked.
To unlock the front panel buttons:
•
Press and hold LOCK until the button is no longer lit.
The front panel buttons are unlocked.
