Kramer VS-1616D, Руководство пользователя

Страница: 16 / 165

VS-1616D – Overview 9
6 RCL Press to recall a preset. After pressing the MENU button, this
button lights and is enabled.
7 DELAY Press to set the delay between confirming an action and the
execution of the action
8 ENT Press to complete the input-output setup when using a one-digit
number instead of two digits. For example, to enter input 5, you
can press either 05 or 5, ENT.
Press to enter the options in a setup menu.
9 BREAKAWAY Button Press to exit a Menu (see Section 7 )
10 DEFAULT SETUP Button Press to recall the default setup (see Section 6.4.5 )
11 OUTPUTS/INPUTS
LCD Display Displays the outputs (upper row) switched to the selected inputs
(lower row), (see
Section 6.1 ).
Displays user interface messages and menus.
12 IR Receiver Infrared remote control sensor
13 IR LED Lights yellow when receiving commands from the IR remote
control transmitter
14 TAKE Button Press to confirm actions (see Section 6.3.2 )
15 MENU Button Press once to enable the ALL, OFF, STO and RCL buttons (see
Section 7 ).
Press again to enter the configuration menu (see Section 7.2 ).
When in a Menu, press to cycle through the menu items.
16 LOCK Button Press and hold for approximately 2 sec to lock/unlock the front
panel buttons (see
Section 6.5 )
Figure 2: VS-1616D Front Panel Numeric Keypad
# Feature Function
17
◄ (Backward)
Press to shift the sliding window to the right (the LCD display
only shows 13 cross-points out of a total of 16).
18 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 Numeric keypad, 1 to 0
19
► (Forward)
Press to shift the sliding window to the left (the LCD display only
shows 13 cross-points out of a total of 16).