VS-1616D - Using the Test Video Plus Analog Audio Card
45
8
Using the Test Video Plus Analog Audio
Card
8.1
Defining the Test Video Plus Analog Audio Card
The
Test Video
Plus Analog Audio
card is a 2-Input/Output DVI with Analog
Audio Card (F-16), preinstalled in the
VS-1616D
for initial setup and installation
purposes (see
for more information). For information on using the
Test
Video
Plus Analog Audio
card for troubleshooting audio and video problems, see
Section 11
8.1.1
Test Video Plus Analog Audio Card Configuration
The
Test Video Plus Analog Audio
card configuration table appears as follows
when configured as an input card:
Test Video Plus Analog Audio Input Card
Parameter
Description
Default
Reset Input
Re-power—Power cycles the port.
Factory—Performs a factory reset to default values of the port.
Re-power
Audio Select
Selects the audio source:
Auto—Audio signal selection is controlled by the presence or
absence of a plug in the 3.5mm mini jack. When present, AUD-
Analog is selected, when absent, AUD-Embedded is selected.
AUD-Embedded—HDMI audio is selected.
AUD-Analog—Analog audio is selected.
Auto
Volume
Sets the audio output volume (0–70).
50
Audio Balance
Sets the audio output channel balance (0–100).
50
Audio Bass
Sets the audio output bass level (0–15).
7
Audio Treble
Sets the audio output treble level (0–15).
7
Audio Mute
MUTE—Mutes the audio input.
Non-MUTE—Unmutes the audio input.
Non-MUTE
