Kramer Electronics Ltd.
VP-554X
– Using Embedded Web pages
37
Using VP-554X
with a “Step
-
in”
Device
Remotely manage a Step-In device (for example, Kramer
DIP-31
) that is connected to
VP-554X
. In this example, Kramer
DIP-31
is connected to the HDMI IN 2.
To control another device remotely:
1. Connect the Kramer
DIP-31
to an HDMI input (for example HDMI IN 2).
2. In the Navigation pane click
Data Routing
. The Data Routing page appears.
Figure 20: Data Routing Page
– Enabling Step-in
3. Check HDMI IN2 under Step-in Device.
Figure 21: Data Routing Page
– Step-in Enabled on HDMI IN2